Without an autocomplete hint, focusing a terminal on iOS/iPadOS Safari
pops the AutoFill accessory (passwords / credit cards / contacts) for
the hidden textarea. The sibling hints (autocorrect, autocapitalize,
spellcheck) are already set; this adds the missing one.
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
Remove early return when ybase===0 && y===0 so clear() always
clears markers, resets buffer lines, and refills the viewport.
Co-authored-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Daniel Imms <Tyriar@users.noreply.github.com>
* fix(selection): drag-scroll end row matches last visible line
Use ydisp + rows - 1 for selectionEnd when scrolling down during drag,
consistent with finalSelectionEnd for select-all.
Co-authored-by: Daniel Imms <Tyriar@users.noreply.github.com>
* fix(selection): reset start to origin when start row is trimmed
When handleTrim removes the selection start row, clamp to [0,0] and
refresh; do not keep a stale column on row 0.
Co-authored-by: Daniel Imms <Tyriar@users.noreply.github.com>
---------
Co-authored-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Daniel Imms <Tyriar@users.noreply.github.com>
* fix(DomRenderer): skip missing buffer lines during row render
renderRows and link underline refresh stopped updating when any
viewport row lacked buffer data, leaving stale DOM on rows below.
Match ImageStorage.render behavior: clear the row element when
present and continue with remaining rows.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(DomRenderer): clear blink state when skipping missing lines
When a viewport row has no buffer line, renderRows clears the row DOM
and continues but did not reset _rowHasBlinkingCells for that row.
That could leave the text blink manager thinking blinking cells remain
after the row was emptied.
Clear blink state for the row when skipping a missing buffer line,
including during link underline refresh.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
Character joiner scanning already iterated cells with
getTrimmedLength(), but trailing attribute runs and
_stringRangesToCellRanges used buffer cols. On short lines that
could run joiners on a single trailing cell and extend open ranges
through empty tail columns, affecting ligature/join rendering.
Use trimmed length consistently for trailing-run detection, the
cell-range walk, and the final range end column.
Co-authored-by: Cursor <cursoragent@cursor.com>
* Add InputHandler unit tests for ISO-2022 charset mapping
InputHandler unit tests always used MockCharsetService, so regressions in
print()'s ASCII remapping, G0/G1 designation (ESC ( ) * +), and SO/SI
level switching were never caught at unit level.
Add an ISO-2022 character sets suite wired to real CharsetService and
BufferService that verifies DEC line drawing on G0 (ESC ( 0), G1 after
ESC ) 0 + SO, and charset/glevel restoration via ESC 7 / ESC 8 before
printing.
Co-authored-by: Cursor <cursoragent@cursor.com>
* Add BufferService.scroll unit tests for isUserScrolling
BufferService.scroll() adjusts ybase and ydisp differently depending on
whether the circular buffer is full and whether isUserScrolling is set,
but no unit test asserted those branches. InputHandler and other callers
use MockBufferService.scroll, which throws, so real scroll viewport logic
was only exercised indirectly.
Add BufferService.test.ts covering full-buffer scroll with the user
scrolled up (ydisp decrements), partial-buffer scroll while scrolled up
(ydisp unchanged), and full-buffer scroll at the viewport bottom
(ydisp tracks ybase).
Co-authored-by: Cursor <cursoragent@cursor.com>
* Add InputHandler unit tests for DECOM cursor positioning
CUP with DEC origin mode (DECOM) offsets rows by the scroll region top
and clamps within DECSTBM margins, but unit tests only toggled the mode
for save/restore. Playwright covered the combination; headless unit tests
did not.
Add a cursor positioning test matching the Playwright DECOM case: with
margins and origin on, CUP places the cursor relative to scrollTop, clamps
to the margin, and uses absolute rows when origin is off.
Co-authored-by: Cursor <cursoragent@cursor.com>
* Add WindowsMode unit tests for wrap heuristic edges
ConPTY does not set isWrapped on soft-wrapped lines; updateWindowsModeWrappedState
infers wrapping from the last cell of the previous row. Browser Terminal tests
exercise this only through full writes, with no direct coverage of the helper
or negative cases (trailing space or null).
Add WindowsMode.test.ts asserting isWrapped is set for a full non-space line,
cleared for trailing whitespace, and cleared when the previous line ends empty.
Co-authored-by: Cursor <cursoragent@cursor.com>
* Add OscParser.reset unit test for mid-payload abort
OscParser.reset() must call end(false) on active handlers when aborted
during PAYLOAD, but no test invoked reset() directly. EscapeSequenceParser
tests mock OSC, so production reset/cleanup was unverified at unit level.
Add a reset describe block asserting handlers receive END false after a
partial payload, then a subsequent OSC sequence completes normally.
Co-authored-by: Cursor <cursoragent@cursor.com>
* Add DcsParser.reset unit test for mid-payload abort
DcsParser.reset() must call unhook(false) on hooked handlers when aborted
mid-DCS, matching OscParser's end(false) cleanup. No DcsParser test called
reset() directly, leaving the abort path unverified at unit level.
Add a reset describe block asserting UNHOOK false after partial put, then a
subsequent DCS sequence completes with UNHOOK true.
Co-authored-by: Cursor <cursoragent@cursor.com>
* Add InputHandler print tests for grapheme joining
print() uses UnicodeService.shouldJoin to merge combining marks, but
InputHandler tests never exercised that path. The U+200B infinite-loop
regression test used mocks and had no assertions, so it would pass even
if print() misbehaved.
Add tests for e + combining acute in one parse and across two parses.
Strengthen the U+200B regression test to use BufferService and assert the
buffer does not grow spurious rows.
Co-authored-by: Cursor <cursoragent@cursor.com>
* Add CharsetService unit tests for glevel and designation
CharsetService only updates the active charset when setgCharset targets the
current glevel; most InputHandler tests use MockCharsetService instead. A
regression in setgLevel or inactive-slot designation would not be caught
without direct service tests.
Add CharsetService.test.ts covering inactive designation, setgLevel
activation, active-slot updates, and reset clearing state.
Co-authored-by: Cursor <cursoragent@cursor.com>
* Add reflowCursorLine unit tests for ConPTY resize behavior
reflowCursorLine lets resize reflow wrapped lines that contain the cursor
(needed when ConPTY does not). No test referenced the option or
reflowLargerGetLinesToRemove's cursor skip branch.
Add BufferReflow tests for skip vs reflow when the cursor is inside a
wrapped block, and Buffer.resize tests showing merge on widen only when
reflowCursorLine is enabled.
Co-authored-by: Cursor <cursoragent@cursor.com>
* Add EscapeSequenceParser reset test for async pause recovery
reset() sets ParserStackType.RESET so the next parse continues in GROUND
at chunkPos + 1 without resuming a paused async handler. Existing async
tests only verified reset lifts FAIL after improper continuation, not
mid-chunk recovery with trailing printable data.
Add a test that pauses on async CSI, calls reset(), then continues parsing
and asserts XY is printed once and the stack returns to NONE.
Co-authored-by: Cursor <cursoragent@cursor.com>
* Add Buffer.resize unit test for ConPTY row growth
When rows increase on Windows ConPTY, Buffer.resize appends lines without
decrementing ybase or ydisp so the viewport stays stable while ConPTY
repaints. Buffer tests covered the non-Windows scroll-up path but never
passed windowsPty into options.
Add a ConPTY row-growth test asserting ybase, ydisp, and line count when
windowsPty is configured.
Co-authored-by: Cursor <cursoragent@cursor.com>
* Add Buffer reflow test for ConPTY buildNumber threshold
Buffer disables reflow on ConPTY when buildNumber is below 21376, but no
unit test asserted that gate. Column shrink without reflow leaves wrapped
content on a single line instead of splitting across rows.
Add a test comparing shrink behavior at build 21375 versus 21376, plus
retain unwrap-on-widen coverage for supported ConPTY builds.
Co-authored-by: Cursor <cursoragent@cursor.com>
* Add ApcParser.reset unit test for mid-payload abort
ApcParser.reset() calls end(false) on active handlers when aborted mid-APC,
matching OscParser and DcsParser, but no ApcParser test invoked reset()
directly.
Add a reset describe block asserting END false after partial put and a
clean subsequent APC sequence.
Co-authored-by: Cursor <cursoragent@cursor.com>
* Add InputHandler unit test for REP with grapheme clusters
repeatPrecedingCharacter uses parser.precedingJoinState and reprints the
full cluster from the buffer, but only Playwright covered e + combining
acute with CSI b. A regression could break REP for joined sequences without
failing unit tests.
Add a print-suite test asserting CSI 2 b triples e + acute in one parse.
Co-authored-by: Cursor <cursoragent@cursor.com>
* Add InputHandler unit tests for REP no-op cases
repeatPrecedingCharacter returns early when parser.precedingJoinState is
zero, including after another escape sequence clears join state. Only the
positive grapheme REP case was unit tested.
Add tests for bare CSI b and for REP following SGR so regressions cannot
spuriously duplicate buffer content.
Co-authored-by: Cursor <cursoragent@cursor.com>
* Add DecorationManager unit test for wrapped search matches
DecorationManager splits matches across wrapped rows with per-segment x
and width, but only SearchEngine had unit coverage; decoration geometry
was left to Playwright.
Add DecorationManager.test.ts using a real Terminal, a wrapped-buffer
match from SearchEngine, and assertions on registerDecoration options
for both row segments.
Co-authored-by: Cursor <cursoragent@cursor.com>
* Add BufferService.scroll unit test for DECSTBM margins
When scrollTop is non-zero, scroll() shifts lines inside the margin with
shiftElements instead of pushing scrollback. Existing BufferService tests
only covered scrollTop === 0.
Add a test with margins on rows 1–3 that verifies rows outside the region
stay fixed and lines inside the region scroll correctly.
Co-authored-by: Cursor <cursoragent@cursor.com>
* Add BufferService.scrollLines unit tests
scrollLines adjusts ydisp and toggles isUserScrolling for viewport
scrolling, but only scroll() had unit coverage. Regressions in the
user-scroll flag or ydisp clamping would affect the whole viewport.
Add tests for scrolling up, clamping at ydisp 0, and clearing
isUserScrolling when reaching the buffer bottom.
Co-authored-by: Cursor <cursoragent@cursor.com>
* Add DecorationManager overview ruler dedup unit test
Multiple highlight matches on the same buffer line should only register
one overview ruler marker; later matches on that line omit ruler options.
Co-authored-by: Cursor <cursoragent@cursor.com>
* Assert overview ruler on each line of wrapped search match
Wrapped highlight decorations span two buffer lines; each segment
should register overview ruler options unlike same-line dedup.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(buffer): bound combined-cell copy in copyCellsFrom
When copying a column range, combined-string metadata was copied for
every source column >= srcCol with no upper limit. Partial copies could
pull _combined entries from outside [srcCol, srcCol + length) into the
destination and corrupt cells beyond the copied span.
Only copy combined keys within the same range as the cell data loop.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(buffer): clear stale _combined entry in BufferLine.setCell
setCell updated combined data when IS_COMBINED_MASK was set but left
orphaned _combined[index] entries when writing a non-combined cell.
Delete the map entry in that case so later combined copies and lookups
stay aligned with cell content flags.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(buffer): clear stale extended attrs in BufferLine.setCell
setCell stored extended attributes when HAS_EXTENDED was set but did
not remove orphaned _extendedAttrs[index] when overwriting with a
cell without extended background data. Delete the entry in that case,
matching the combined-cell cleanup added for setCell earlier.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(buffer): clear dest extended attrs in copyCellsFrom
When copying a column range, extended attributes were copied from
source cells with HAS_EXTENDED but stale _extendedAttrs on the
destination were left for cells without extended data. Delete dest
entries in that case, matching setCell behavior and the bounded
_combined copy loop.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(buffer): clear extended attrs in setCellFromCodepoint
The input-handler fast path set extended data when HAS_EXTENDED was
present but left orphaned _extendedAttrs entries when overwriting
with non-extended cells. Delete the map entry in that case, matching
setCell and copyCellsFrom.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(buffer): clear stale combined data in setCellFromCodepoint
When the input handler overwrites a cell that previously held a
grapheme cluster (IS_COMBINED_MASK), setCellFromCodepoint updated
_data and _extendedAttrs but left this._combined[index] intact.
setCell already deletes _combined for non-combined cells; this path
did not, so getString and renderers could show the old cluster string
after a normal codepoint write.
Add delete this._combined[index] at the start of setCellFromCodepoint,
matching setCell's non-combined branch and the extended-attrs cleanup
already performed in the same method.
Co-authored-by: Cursor <cursoragent@cursor.com>
* perf(buffer): only delete stale combined/extended map entries when present
Co-authored-by: Daniel Imms <Tyriar@users.noreply.github.com>
* fix(buffer): treat combined/extended maps as flag-gated caches
_flags in _data are authoritative; sparse maps are only read when
IS_COMBINED_MASK or HAS_EXTENDED is set. setCellFromCodepoint no longer
touches _combined. loadCell clears CellData side fields when flags are off.
copyCellsFrom copies map entries per-cell from src flags only.
Co-authored-by: Daniel Imms <Tyriar@users.noreply.github.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
Co-authored-by: Daniel Imms <Tyriar@users.noreply.github.com>
Apply test-only hunks from docs typo fixes: SharedRendererTests
duplicate word, SerializeAddon workaround comment, and mouse range
spelling in MouseService and InputHandler tests.
Co-authored-by: Daniel Imms <Tyriar@users.noreply.github.com>
Correct "representation" and "registration" spelling in the comment
describing how handler identifiers are encoded for EscapeSequenceParser.
Co-authored-by: Cursor <cursoragent@cursor.com>
addSubParam documents a cap on stored sub parameters; the limit is
enforced via maxSubParamsLength, not subParamsLength (the current count).
Co-authored-by: Cursor <cursoragent@cursor.com>
Use "a Unicode" instead of "an Unicode" on IUnicodeService.register,
and "user's platform" instead of "users platform" above the platform
detection exports.
Co-authored-by: Cursor <cursoragent@cursor.com>
Change "it's view" to "its view" in the comment explaining why new
rows are appended on Windows when using conpty.
Co-authored-by: Cursor <cursoragent@cursor.com>
The onChange event comment said "activate version changed" while the
property is activeVersion. Clarify that the event fires when the active
Unicode version changes.
Co-authored-by: Cursor <cursoragent@cursor.com>
getCoords had a truncated comment ("if there are no valid") and a typo
("addition" vs "additional") in the selection precision note. Complete
the char-size guard comment and fix the selection wording.
Co-authored-by: Cursor <cursoragent@cursor.com>
The Content bitmask JSDoc examples used camelCase names that do not
exist on the enum (codepointMask, isCombined, hasContent, widthMask,
widthShift). Update examples to match the real members:
CODEPOINT_MASK, IS_COMBINED_MASK, HAS_CONTENT_MASK, WIDTH_MASK, and
WIDTH_SHIFT as used throughout BufferLine and CellData.
Co-authored-by: Cursor <cursoragent@cursor.com>
Correct "occurred" in IMouseEvent and keydown JSDoc, remove duplicate
"This" in EscapeSequenceParser ZDM comment, use "elapsed" instead of
"lapsed" in TimeBasedDebouncer, and fix "event" in Keyboard comment.
Co-authored-by: Cursor <cursoragent@cursor.com>
- EscapeSequenceParser: ESC ST is ESC backslash (0x1B 0x5C), not ESC
plus a double-quote character; align @vt metadata with C1 ST on the
following line.
- Color.contrastRatio: document l2 as the second luminance argument.
- Marker.dispose: fix "change" -> "chance" in dispose listener comment.
- Buffer.clear: fix possessive "it's" -> "its" in JSDoc.
Co-authored-by: Cursor <cursoragent@cursor.com>
RENDER_DEBOUNCE_THRESHOLD_MS was declared above the import, which
breaks ES module conventions and can confuse tooling. Move the import
to the top of the module after the license header.
Co-authored-by: Cursor <cursoragent@cursor.com>
_clearIdleTimer() used truthiness on _idleTimeout, so a setTimeout
handle of 0 would not be cleared. Compare against undefined, consistent
with RenderDebouncer rAF handling.
Co-authored-by: Cursor <cursoragent@cursor.com>
dispose(), addRefreshCallback(), and refresh() used truthiness on
_animationFrame, so a requestAnimationFrame handle of 0 would not be
cancelled or deduplicated. Compare against undefined instead, matching
other timer checks in the browser layer.
Co-authored-by: Cursor <cursoragent@cursor.com>
TimeBasedDebouncer can schedule a trailing setTimeout when refresh
requests are throttled. If the debounce window later elapses and an
immediate refresh runs, that pending timeout was left armed and could
fire afterward, causing a duplicate _innerRefresh (e.g. extra live
region updates for screen readers).
Clear any pending timeout and reset _additionalRefreshRequested before
running the immediate refresh path.
Co-authored-by: Cursor <cursoragent@cursor.com>
_identifier() checked custom prefix bytes with
`res && 0x3c > res || res > 0x3f`, which parsed as
`(res && 0x3c > res) || (res > 0x3f)` because && binds tighter
than ||. A prefix of NUL (0x00) skipped both clauses and was
accepted even though only 0x3c..0x3f are valid.
Use an explicit range test: res < 0x3c || res > 0x3f. Mirror the
same fix in ApcParser and DcsParser test identifier helpers.
Co-authored-by: Cursor <cursoragent@cursor.com>
Per Bothner
jerch
Taran
rufatkulandClaude Fable 5
Anthony Kim
