mirror of
https://github.com/github/awesome-copilot.git
synced 2026-02-20 02:15:12 +00:00
175 lines
4.3 KiB
Markdown
175 lines
4.3 KiB
Markdown
# T48 Universal EEPROM / Flash Programmer Specification
|
|
|
|
## 1. Overview
|
|
|
|
The **T48 Universal Programmer** (also sold as **TL866-3G / TL866II Plus successor**) is a USB-connected device used to **read, program, and verify** a wide range of **EEPROM, Flash, EPROM, GAL, and microcontroller devices**. It is commonly used in **retrocomputing**, **firmware development**, and **electronics repair** workflows.
|
|
|
|
The T48 is a modern replacement for the TL866 series, offering expanded device support and improved software compatibility.
|
|
|
|
---
|
|
|
|
## 2. General Characteristics
|
|
|
|
| Feature | Description |
|
|
| ------------------- | ---------------------------------- |
|
|
| Programmer type | Universal device programmer |
|
|
| Interface | USB 2.0 |
|
|
| Socket | ZIF-48 |
|
|
| Supported devices | EEPROM, Flash, EPROM, GAL, MCU |
|
|
| Programming voltage | Generated internally |
|
|
| Host OS | Windows, Linux (open-source tools) |
|
|
| Verification | Read-after-write, checksum |
|
|
|
|
---
|
|
|
|
## 3. Physical Description
|
|
|
|
### 3.1 ZIF Socket
|
|
|
|
* **48-pin Zero Insertion Force (ZIF)** socket
|
|
* Supports DIP packages directly
|
|
* PLCC, SOP, TSOP supported via adapters
|
|
|
|
### 3.2 Indicators and Controls
|
|
|
|
| Item | Description |
|
|
| ------------- | --------------------------- |
|
|
| Status LED | Power / activity indication |
|
|
| ZIF lever | Locks IC into socket |
|
|
| USB connector | Host connection and power |
|
|
|
|
---
|
|
|
|
## 4. Supported Device Categories
|
|
|
|
### 4.1 Memory Devices
|
|
|
|
* 27xxx EPROM
|
|
* 28xxx EEPROM (e.g., AT28C256)
|
|
* 29xxx Flash memory
|
|
* Serial EEPROMs (with adapters)
|
|
|
|
### 4.2 Programmable Logic
|
|
|
|
* GAL16V8, GAL22V10 (read/write/verify)
|
|
|
|
### 4.3 Microcontrollers (Limited)
|
|
|
|
* Some PIC, AVR, and 8051-family devices
|
|
* Programming support depends on voltage and pinout
|
|
|
|
---
|
|
|
|
## 5. Electrical Capabilities
|
|
|
|
| Parameter | Description |
|
|
| -------------- | ---------------------------------------- |
|
|
| VCC range | 1.8 V - 6.5 V (device dependent) |
|
|
| VPP | Internally generated, device-specific |
|
|
| I/O protection | Over-current and short-circuit protected |
|
|
|
|
---
|
|
|
|
## 6. Programming Operations
|
|
|
|
### 6.1 Common Operations
|
|
|
|
* Device identification
|
|
* Blank check
|
|
* Read
|
|
* Program (write)
|
|
* Verify
|
|
* Erase (Flash/EPROM)
|
|
|
|
### 6.2 Verification Modes
|
|
|
|
* Byte-by-byte comparison
|
|
* Checksum / CRC validation
|
|
|
|
---
|
|
|
|
## 7. Software Support
|
|
|
|
### 7.1 Official Software
|
|
|
|
* Windows-based GUI
|
|
* Device database with pin mappings
|
|
* Automatic voltage and timing control
|
|
|
|
### 7.2 Open-Source Tools
|
|
|
|
| Tool | Notes |
|
|
| --------- | -------------------------------- |
|
|
| `minipro` | Linux / macOS / Windows CLI tool |
|
|
| libusb | USB communication backend |
|
|
|
|
Example:
|
|
|
|
```bash
|
|
minipro -p AT28C256 -w rom.bin
|
|
```
|
|
|
|
---
|
|
|
|
## 8. Device Insertion and Pin Mapping
|
|
|
|
* Device orientation indicated by **pin 1 marker**
|
|
* Many devices use **lower-left alignment** in ZIF socket
|
|
* Software displays correct insertion diagram
|
|
|
|
---
|
|
|
|
## 9. Typical Workflow (EEPROM Example)
|
|
|
|
1. Select device type (e.g., AT28C256)
|
|
2. Insert chip into ZIF socket
|
|
3. Perform blank check
|
|
4. Load binary image
|
|
5. Program device
|
|
6. Verify written contents
|
|
|
|
---
|
|
|
|
## 10. Power and Safety Notes
|
|
|
|
* Programmer powered entirely via USB
|
|
* Do not insert or remove ICs while programming
|
|
* Use adapters for non-DIP packages
|
|
|
|
---
|
|
|
|
## 11. Limitations
|
|
|
|
* Not all microcontrollers are supported
|
|
* High-voltage EPROMs may require specific adapters
|
|
* Not intended for in-circuit programming (ISP)
|
|
|
|
---
|
|
|
|
## 12. Common Use Cases
|
|
|
|
* Programming EEPROMs for 6502 SBCs
|
|
* Flashing ROM images for retro systems
|
|
* Reading and backing up legacy EPROMs
|
|
* GAL logic development
|
|
|
|
---
|
|
|
|
## 13. Comparison with TL866II Plus
|
|
|
|
| Feature | TL866II Plus | T48 |
|
|
| ----------------- | ------------ | --------------- |
|
|
| Device support | Good | Expanded |
|
|
| OS support | Windows | Windows / Linux |
|
|
| Open-source tools | Limited | Excellent |
|
|
|
|
---
|
|
|
|
## 14. References
|
|
|
|
* <https://www.bulcomp-eng.com/datasheet/XGecu%20T48%20-%20Introduction.pdf>
|
|
* <https://gitlab.com/DavidGriffith/minipro>
|
|
* <https://opensource.com/article/23/1/learn-machine-language-retro-computer>
|
|
|
|
---
|