.

.config/alacritty/alacritty.yml

@@ -20,7 +20,7 @@ window:
 
 scrolling:
   history: 10000
-  multiplier: 2
+  multiplier: 3
 
 # Font configuration
 font:
@@ -76,170 +76,26 @@ colors:
     cyan: "#9F8D5E"
     white: "#dbcdac"
 
-# Mouse bindings
-#
-# Mouse bindings are specified as a list of objects, much like the key
-# bindings further below.
-#
-# To trigger mouse bindings when an application running within Alacritty captures the mouse, the
-# `Shift` modifier is automatically added as a requirement.
-#
-# Each mouse binding will specify a:
-#
-# - `mouse`:
-#
-#   - Middle
-#   - Left
-#   - Right
-#   - Numeric identifier such as `5`
-#
-# - `action` (see key bindings)
-#
-# And optionally:
-#
-# - `mods` (see key bindings)
 mouse_bindings:
-  - { mouse: Middle, action: PasteSelection }
+  - { mouse: Middle, mods: Shift, action: PasteSelection }
+  - { mouse: Right,  mods: Shift, action: Paste }
+  - { mouse: Middle,  action: None }
+  - { mouse: Right,  action: None }
 
-#ToggleBlockSelection    }
-  #- { key: V,      mods: Alt,           mode: Vi, action: ToggleSemanticSele
-#    - A-Z
-#    - F1-F24
-#    - Key0-Key9
-#
-#    A full list with available key codes can be found here:
-#    https://docs.rs/glutin/*/glutin/event/enum.VirtualKeyCode.html#variants
-#
-#    Instead of using the name of the keys, the `key` field also supports using
-#    the scancode of the desired key. Scancodes have to be specified as a
-#    decimal number. This command will allow you to display the hex scancodes
-#    for certain keys:
-#
-#       `showkey --scancodes`.
-#
-# Then exactly one of:
-#
-# - `chars`: Send a byte sequence to the running application
-#
-#    The `chars` field writes the specified string to the terminal. This makes
-#    it possible to pass escape sequences. To find escape codes for bindings
-#    like `PageUp` (`"\x1b[5~"`), you can run the command `showkey -a` outside
-#    of tmux. Note that applications use terminfo to map escape sequences back
-#    to keys. It is therefore required to update the terminfo when changing an
-#    escape sequence.
-#
-# - `action`: Execute a predefined action
-#
-#   - ToggleViMode
-#   - Copy
-#   - Paste
-#   - PasteSelection
-#   - IncreaseFontSize
-#   - DecreaseFontSize
-#   - ResetFontSize
-#   - ScrollPageUp
-#   - ScrollPageDown
-#   - ScrollLineUp
-#   - ScrollLineDown
-#   - ScrollToTop
-#   - ScrollToBottom
-#   - ClearHistory
-#   - Hide
-#   - Minimize
-#   - Quit
-#   - ToggleFullscreen
-#   - SpawnNewInstance
-#   - ClearLogNotice
-#   - ClearSelection
-#   - ReceiveChar
-#   - None
-#
-#   (`mode: Vi` only):
-#   - Open
-#   - Up
-#   - Down
-#   - Left
-#   - Right
-#   - First
-#   - Last
-#   - FirstOccupied
-#   - High
-#   - Middle
-#   - Low
-#   - SemanticLeft
-#   - SemanticRight
-#   - SemanticLeftEnd
-#   - SemanticRightEnd
-#   - WordRight
-#   - WordLeft
-#   - WordRightEnd
-#   - WordLeftEnd
-#   - Bracket
-#   - ToggleNormalSelection
-#   - ToggleLineSelection
-#   - ToggleBlockSelection
-#   - ToggleSemanticSelection
-#
-#   (macOS only):
-#   - ToggleSimpleFullscreen: Enters fullscreen without occupying another space
-#
-#   (Linux/BSD only):
-#  - CopySelection: Copies into selection buffer
-#
-# - `command`: Fork and execute a specified command plus arguments
-#
-#    The `command` field must be a map containing a `program` string and an
-#    `args` array of command line parameter strings. For example:
-#       `{ program: "alacritty", args: ["-e", "vttest"] }`
-#
-# And optionally:
-#
-# - `mods`: Key modifiers to filter binding actions
-#
-#    - Command
-#    - Control
-#    - Option
-#    - Super
-#    - Shift
-#    - Alt
-#
-#    Multiple `mods` can be combined using `|` like this:
-#       `mods: Control|Shift`.
-#    Whitespace and capitalization are relevant and must match the example.
-#
-# - `mode`: Indicate a binding for only specific terminal reported modes
-#
-#    This is mainly used to send applications the correct escape sequences
-#    when in different modes.
-#
-#    - AppCursor
-#    - AppKeypad
-#    - Alt
-#
-#    A `~` operator can be used before a mode to apply the binding whenever
-#    the mode is *not* active, e.g. `~Alt`.
-#
-# Bindings are always filled by default, but will be replaced when a new
-# binding with the same triggers is defined. To unset a default binding, it can
-# be mapped to the `ReceiveChar` action. Alternatively, you can use `None` for
-# a no-op if you do not wish to receive input characters for that binding.
-#
-# If the same trigger is assigned to multiple actions, all of them are executed
-# at once.
 key_bindings:
   - { key: Return,   mods: Control|Shift, action: SpawnNewInstance }
   - { key: V,        mods: Alt, action: Paste}
   - { key: J,        mods: Alt, action: IncreaseFontSize }
   - { key: K,        mods: Alt, action: DecreaseFontSize }
-  - { key: J,        mods: Shift, action: ScrollLineUp}
-  - { key: K,        mods: Shift, action: ScrollLineDown}
+  # - { key: J,        mods: Shift, action: ScrollLineUp}
+  # - { key: K,        mods: Shift, action: ScrollLineDown}
   # { mouse: Middle, action: PasteSelection }
   #- { key: Paste,                                action: Paste          }
   #- { key: Copy,                                 action: Copy           }
   #- { key: L,         mods: Control,             action: ClearLogNotice }
   #- { key: L,         mods: Control, mode: ~Vi,  chars: "\x0c"          }
-  #- { key: PageUp,    mods: Shift,   mode: ~Alt, action: ScrollPageUp,  }
-  #- { key: PageDown,  mods: Shift,   mode: ~Alt, action: ScrollPageDown }
+  - { key: PageUp,    mods: Shift,   action: ScrollPageUp,  }
+  - { key: PageDown,  mods: Shift,   action: ScrollPageDown }
   #- { key: Home,      mods: Shift,   mode: ~Alt, action: ScrollToTop,   }
   #- { key: End,       mods: Shift,   mode: ~Alt, action: ScrollToBottom }
 

.config/i3/config

@@ -169,12 +169,7 @@ bindsym $mod+r mode "resize"
 # startup
 exec_always --no-startup-id $HOME/.config/polybar/launch.sh
 
-# Attach workspaces to displays
-exec --no-startup-id i3-msg "workspace 1, move workspace to output eDP1"
-exec --no-startup-id i3-msg "workspace 2, move workspace to output eDP1"
-exec --no-startup-id i3-msg "workspace 3, move workspace to output HDMI"
-
-exec --no-startup-id i3-msg 'exec $TERMINAL; workspace 2; exec firefox;'
+exec --no-startup-id i3-msg 'workspace 1; exec $TERMINAL; workspace 2; exec firefox;'
 exec --no-startup-id feh --bg-scale ~/Wallpapers/seneca.jpg
 exec --no-startup-id ~/bin/autoconfgure_display.sh
 exec --no-startup-id picom --config ~/.config/i3/picom.conf -b

.config/polybar/config

@@ -103,7 +103,7 @@ font-3 - RobotoMono Nerd Font:antialias=true:size=18;0
 ; modules-center = s4 filesystem s5
 ; modules-right =  s4 powermenu s1 pulseaudio s3
 
-modules-left = battery wlan weather arch
+modules-left = battery wlan weather
 modules-center = mpd 
 modules-right =  
 
@@ -559,11 +559,11 @@ exec = ~/.config/polybar/polybar-weather/openweathermap-detailed.sh
 format-background = ${colors.primary}
 format-prefix-foreground = ${colors.background}
 
-[module/arch]
-type = custom/script
-exec = ~/.config/polybar/polybar-network-update/updates-arch-combined.sh
-format-background = ${colors.primary}
-format-prefix-foreground = ${colors.background}
+#[module/arch]
+#type = custom/script
+#exec = ~/.config/polybar/polybar-network-update/updates-arch-combined.sh
+#format-background = ${colors.primary}
+#format-prefix-foreground = ${colors.background}
 
 [module/syngeos]
 type = custom/script

.config/polybar/taskwarrior/taskwarrior.sh

@@ -0,0 +1,7 @@
+#!/bin/bash
+
+most_urgent_desc=`task rc.verbose: rc.report.next.columns:description rc.report.next.labels:1 limit:1 next`
+most_urgent_id=`task rc.verbose: rc.report.next.columns:id rc.report.next.labels:1 limit:1 next`
+most_urgent_due=`task rc.verbose: rc.report.next.columns:due.relative rc.report.next.labels:1 limit:1 next`
+echo "$most_urgent_id" > /tmp/tw_polybar_id
+echo "$most_urgent_desc ·  $most_urgent_due"

nvim/init.vim

@@ -141,6 +141,13 @@ Plug 'robertbasic/vim-hugo-helper'
 
 Plug 'ekalinin/Dockerfile.vim'
 
+
+" Use release branch (recommend)
+Plug 'neoclide/coc.nvim', {'branch': 'release'}
+
+" Or build from source code by using yarn: https://yarnpkg.com
+Plug 'neoclide/coc.nvim', {'do': 'yarn install --frozen-lockfile'}
+
 call plug#end()
 "
 " ########################################################################
@@ -220,6 +227,8 @@ set foldnestmax=10
 "let g:php_folding = 1
 "let g:perl_fold = 1
 
+"set spell spelllang=pl
+
 let g:SimpylFold_docstring_preview = 1
 
 let g:startify_custom_header = []