This change breaks backwards compatibility.
MaxAuthTries specifies the maximum number of authentication attempts
permitted per connection. If set to a negative number, the server will
allow unlimited authentication attempts. MaxAuthTries defaults to 6 if
not specified, which is a backwards incompatible change. On exceeding
maximum authentication attempts, the server will send a disconnect
message to the client.
This configuration property mirrors a similar property in sshd_config
and prevents bad actors from continuously trying authentication.
Change-Id: Ic77d2c29ee2fd2ae5c764becf7df91d29d03131b
Reviewed-on: https://go-review.googlesource.com/35230
Reviewed-by: Han-Wen Nienhuys <hanwen@google.com>
Run-TryBot: Han-Wen Nienhuys <hanwen@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The ssh tests currently require 127.0.0.1 to work which isn't
necessarily available everywhere. To fix the source-address tests,
support comma-separated source-address values per the PROTOCOL.certkeys
file:
Comma-separated list of source addresses
from which this certificate is accepted
for authentication. Addresses are
specified in CIDR format (nn.nn.nn.nn/nn
or hhhh::hhhh/nn).
If this option is not present then
certificates may be presented from any
source address.
Change-Id: I87536ff81ffa005c073da103021ebc0dfb12b620
Reviewed-on: https://go-review.googlesource.com/36110
Reviewed-by: Han-Wen Nienhuys <hanwen@google.com>
Run-TryBot: Heschi Kreinick <heschi@google.com>
Use channels and a dedicated write loop for managing the rekeying
process. This lets us collect packets to be written while a key
exchange is in progress.
Previously, the read loop ran the key exchange, and writers would
block if a key exchange was going on. If a reader wrote back a packet
while processing a read packet, it could block, stopping the read
loop, thus causing a deadlock. Such coupled read/writes are inherent
with handling requests that want a response (eg. keepalive,
opening/closing channels etc.). The buffered channels (most channels
have capacity 16) papered over these problems, but under load SSH
connections would occasionally deadlock.
Fixes#18439.
Change-Id: I7c14ff4991fa3100a5d36025125d0cf1119c471d
Reviewed-on: https://go-review.googlesource.com/35012
Run-TryBot: Han-Wen Nienhuys <hanwen@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Han-Wen Nienhuys <hanwen@google.com>
A net.IP may be represented by both by a 4 as well as a 16 byte long
byte slice. Because of this, it is not safe to compare IP addresses
using bytes.Equal as the same IP address using a different internal
representation will produce mismatches.
Change-Id: I0d228771cf363ccfb9532f8bc2a2fc8eff61f6e9
Reviewed-on: https://go-review.googlesource.com/34450
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The current behaviour of the crypto/ssh server implementation is to
remove the username from ConnMetadata if the connection is done without
authentication (NoClientAuth). This appears to be a bug.
This behaviour is different from other SSH server implementations like
for example Paramiko (Python) which keeps the username.
Additionally RFC4252 (https://www.ietf.org/rfc/rfc4252.txt) section
5 states the username has to be included in every USERAUTH message.
Change-Id: I27fa50db92eb535e90fe088453faa6f2a76ee31f
Reviewed-on: https://go-review.googlesource.com/27612
Reviewed-by: Han-Wen Nienhuys <hanwen@google.com>
Run-TryBot: Han-Wen Nienhuys <hanwen@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Added support for parsing the "new" openssh private key format.
(ed25519 keys only in this format for now)
Signing and verifying functions now work with ed25519 keys.
ed25519 can now be accepted by the server to authenticate a client.
ed25519 can now be accepted by a client as a server host key.
Related documentation used:
https://www.ietf.org/archive/id/draft-bjh21-ssh-ed25519-02.txt
Change-Id: I84385f24d666fea08de21f980f78623f7bff8007
Reviewed-on: https://go-review.googlesource.com/22512
Reviewed-by: Han-Wen Nienhuys <hanwen@google.com>
Run-TryBot: Han-Wen Nienhuys <hanwen@google.com>
This is done by running the key exchange and setting the session ID
under mutex. If the first exchange encounters an already set session
ID, then do nothing.
This fixes a race condition:
On setting up the connection, both sides sent a kexInit to initiate
the first (mandatory) key exchange. If one side was faster, the
faster side might have completed the key exchange, before the slow
side had a chance to send a kexInit. The slow side would send a
kexInit which would trigger a second key exchange. The resulting
confirmation message (msgNewKeys) would confuse the authentication
loop.
This fix removes sessionID from the transport struct.
This fix also deletes the unused interface rekeyingTransport.
Fixes#15066
Change-Id: I7f303bce5d3214c9bdd58f52d21178a185871d90
Reviewed-on: https://go-review.googlesource.com/21606
Reviewed-by: Adam Langley <agl@golang.org>
Reviewed-by: Han-Wen Nienhuys <hanwen@google.com>
280be00 introduced custom server versions; however, at least OpenSSH
clients do not accept a server version that doesn't start with a
protocol version like "SSH-2.0-"; this is not documented in this
library, and automatically adding it in case that the user did not does
no harm.
Change-Id: Iafc23b23160a8277b10cbf29778dc64a96351bd7
Reviewed-on: https://go-review.googlesource.com/14018
Reviewed-by: Adam Langley <agl@golang.org>
The SSH server does not allow for setting a version string in the same
manner as the client. This update adds a ServerVersion member to the
ServerConfig structure which when set, causes the server to use that
member instead of the default version string. This allows building
an golang based SSH server which can present any version string
the user wishes.
It also adds an else statement to the client assignment of the
ClientVersion to avoid an allocation when using a user defined
ClientVersion.
Change-Id: I43d97cfd5a174f2c68f53c5b4e267539ef21937b
Reviewed-on: https://go-review.googlesource.com/1860
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Transport should not be a ReadWriter. It can only write packets, i.e. no partial reads or writes. Furthermore, you can currently do ClientConn.Write() while the connection is live, which sends raw bytes over the connection. Doing so will confuse the transports because the data is not encrypted.
As a consequence, ClientConn and ServerConn stop being a net.Conn
Finally, ensure that {Server,Client}Conn implement LocalAddr and RemoteAddr methods that previously were exposed by an embedded net.Conn field.
R=hanwen
CC=golang-dev
https://golang.org/cl/16610043
The change to add the PublicKey interface accidentally caused certificate handling to expect an extra copy of the private key algorithm name in the binary representation. This change adapts a suitable parsing API and adds a test to ensure that cert handling isn't easily broken in the future.
R=agl, hanwen, jmpittman
CC=golang-dev
https://golang.org/cl/13272055
transport.
Sending the msgNewKeys packet and setting up the key material
now happen under a lock, preventing races with concurrent
writers.
R=kardianos, agl, jpsugar, hanwenn
CC=golang-dev
https://golang.org/cl/14476043
Adds readPacket() to conn, and renames conn to packetConn.
Key exchanges operate on packetConn, so they can be
unittested.
R=agl, jpsugar, dave
CC=golang-dev
https://golang.org/cl/13352055
I ran go vet over all of go.crypto and removed lots of panic("unreachable") that are no longer needed.
R=golang-dev, r, dgryski
CC=golang-dev
https://golang.org/cl/10113043
Fixesgolang/go#3810.
Fixes chanWriter Write after close behaviour bug.
Fixes serverChan writePacket after close bug.
Addresses final comments by agl on 6405064, plus various cleanups.
R=agl, kardianos, gustav.paul, fullung
CC=golang-dev
https://golang.org/cl/6479056
This proposal moves the check for max packet into
channel.writePacket. Callers should be aware they cannot
pass a buffer larger than max packet. This is only a
concern to chanWriter.Write and appropriate guards are
already in place.
There was some max packet handling in transport.go but it was
incorrect. This has been removed.
This proposal also cleans up session_test.go.
R=gustav.paul, agl, fullung, huin
CC=golang-dev
https://golang.org/cl/6460075
RFC 4254 s5.2 is clear that a client must never send a data
packet larger than the value of maximum packet supplied by the
remote side during channel setup. The client was not honoring
this value, in fact it wasn't even recording it.
Thanks to Albert Strasheim for the bug report.
R=agl, fullung
CC=golang-dev
https://golang.org/cl/6448128
This CL introduces a new struct, channel to hold common shared
functions.
* add a new channel struct, which is embeded in {client,server}Chan.
* move common methods from {client,server}Chan into channel.
* remove unneeded used of serverConn.lock in serverChan
(transport.writePacket has its own mutex).
* remove filteredConn, introduce conn.
R=agl, gustav.paul
CC=golang-dev
https://golang.org/cl/6128059
These are the cosmetic cleanups from the bits of code that I
rereviewed.
1) stringLength now takes a int; the length of the string. Too many
callers were allocating with stringLength([]byte(s)) and
stringLength only needs to call len().
2) agent.go now has sendAndReceive to remove logic that was
duplicated.
3) We now reject negative DH values
4) We now reject empty packets rather than crashing.
R=dave, jonathan.mark.pittman
CC=golang-dev
https://golang.org/cl/6061052
Also, add support for hmac-sha1.
At the suggestion of AGL hmac-md5, and hmac-md5-96
support was not included.
Fixesgolang/go#3095.
R=golang-dev, agl, huin
CC=golang-dev
https://golang.org/cl/5696065
Manual edits to README.
Moved from main Go repository, deleted Makefiles, ran gofix -r go1rename.
Tested with: go test code.google.com/p/go.crypto/...
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/5564059
Artyom Pervukhin
Spencer Tung
Han-Wen Nienhuys
Catalin Nicutar
James Myers
Heschi Kreinick
Péter Szilágyi
Sven Blumenstein
Martin Garton
Lewin Bormann
Kristopher Watts
Adam Langley
Dave Cheney
Jonathan Pittman
JP Sugarbroad
Daniel Theophanes
Russ Cox